Free Roofer Matching Repairs, Re-Roofing, Flat & Metal Roofs Roofing Across Ottawa
Find a Roofer
Metal Roofs | 0 views |

Metal roof on a low-slope Ottawa addition: minimum slope?

Question

Metal roof on a low-slope Ottawa addition: minimum slope?

Answer from Roofing IQ

The 2024 Ontario Building Code sets the minimum slope for profiled metal roofing at 1 in 4 (Division B, Table 9.26.3.1.). That is the general rule. However, the Code also allows lower slopes for low-slope profiled metal systems, provided the installation follows the manufacturer's written recommendations (Division B, 9.26.3.1.(3)). So the slope your addition can use depends on which metal roofing system is specified and what the manufacturer's documentation actually permits for that product.

If your addition's slope is below 1 in 4, ask the roofer to show that the specific system is documented for low-slope use. The Code requires roofing materials to be installed in conformance with the manufacturer's written instructions (Division B, 9.26.2.2.).

On permits, the City of Ottawa's exemption list names asphalt shingles only, and we found nothing on metal roofing either way, so confirm with the City's Building Code Client Service Centre before work starts.

A few other Code points apply here regardless of slope:

  • Valleys between the addition roof and any adjoining shingled slope must be flashed (Division B, 9.26.4.3.).
  • If the upper side of a chimney on the sloping portion is more than 750 mm wide, a saddle is required (Division B, 9.26.4.8.).
  • Attic or roof-space ventilation requirements under Division B, Section 9.19 apply to the addition if insulation sits between the ceiling and the roof sheathing.
Eave protection under Division B, 9.26.5.1. applies to shingle, shake or tile roofs. Metal roofing is not in that list, so the eave-protection strip requirement does not apply directly to the metal portion, though flashing at the eave edge still needs to be detailed correctly.

Ask the roofer to show you the manufacturer's technical data sheet for the specific system and confirm it covers the slope you have.

The one question worth asking each roofer: which metal system are you proposing, and does its maker's documentation cover my addition's slope?

Ottawa Roofing Pro

Want this done at your place?

Tell us about your roof and we'll send it to local Ottawa roofing contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa roofing contractors. Interested roofers reply by email. A confirmation is on its way to your inbox.

Roofing IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local roofing contractors in Ottawa. Free matching, no obligation.

Find a Roofer