Metal Roofing
Standing-seam and metal shingle or panel roofs on Ottawa homes, on slopes the Building Code allows for profiled metal.
2026 Ottawa-area and Ontario published quotes read in September 2026; standing seam sits at the top of the range. Your quote will differ.
Find a RooferAbout Metal Roofing
Metal roofing comes in two broad families: standing-seam panels with raised, concealed-fastener seams, and metal shingles or panels that imitate other materials. Both are sold in Ottawa as long-lasting replacements for asphalt.
The 2024 Ontario Building Code sets a minimum slope of 1 in 4 for profiled metal roofing, and allows lower slopes only for low-slope profiled metal systems installed to the manufacturer's written recommendations (Table 9.26.3.1. and 9.26.3.1.(3)). As with every roofing material in the Code, the maker's written instructions govern the installation.
The City of Ottawa's list of projects that do not need a permit names asphalt shingles, not metal. We found no ottawa.ca statement on metal re-roofing either way, so ask the City before you switch materials. If a switch involves structural changes, the City lists structural repairs or alterations among the work that needs a permit. Heritage properties need City approval before changes that affect heritage attributes.
How long a metal roof lasts is where sales pitches get loud. No Canadian government or standards body publishes a lifespan figure for metal roofs; the figures you will see come from roofers and manufacturers. Treat any number as a sales claim and read the written warranty instead.
Published Ontario-area metal roofing prices read in September 2026 run from about $8 to $22 per square foot, with standing seam at the upper end. Ask whether the price includes tear-off, underlayment, trim and flashing.
What This Work Covers
- Standing-seam steel panels
- Metal shingles and panels
- Trim, ridge and valley flashing
- Snow and ice considerations at the eaves
- Written warranty terms, read before you sign
Popular For
What this work costs
Common questions about metal roofing
- Metal roof on a low-slope Ottawa addition: minimum slope?
- Standing seam versus metal shingles: which costs more in Ottawa?
- Do trim and flashing colours matter on an Orleans metal roof?
- Which metal roof profile suits a Stittsville bungalow?
- Switching from shingles to metal in Ottawa: permit needed?
- Price of a metal roof for an Ottawa house?
- Should I pick metal or asphalt on price alone for my Ottawa home?
- Metal roof on an Ottawa house with a chimney: flashing issues?
Other Roofing Services
Roof Repair
Leaks, lifted or missing shingles, worn vent boots and failed flashing found and fixed on Ottawa homes before the water reaches a ceiling.
Roof Replacement
Asphalt shingle re-roofing on Ottawa homes: tear-off, eave protection, ventilation and new shingles, and what the 2024 Ontario Building Code expects of a re-roof.
Flat Roofing
Low-slope roofs in EPDM, TPO or modified bitumen on Ottawa garages, additions, porches and flat-roofed homes, repaired or replaced.
Roof Inspection
A look at shingles, flashing, vents and the attic to decide whether an Ottawa roof needs a repair, a replacement or nothing yet.
Roof Ventilation and Ice Dams
Attic vents checked against the Building Code's 1/300 rule, and the heat loss that feeds ice dams at the eaves found and fixed.
Skylights and Flashing
Leaking skylights, chimney and wall flashing and valleys resealed or re-flashed; new skylight openings planned with the permit rules in mind.
Emergency Leak Tarping
A temporary cover over storm or leak damage so water stops getting in until a proper roof repair can be scheduled.
Ready to Get Started?
Tell us about your metal roofing job and we'll send it to local roofing contractors in Ottawa. They reply by email.