Flat Roofing
Low-slope roofs in EPDM, TPO or modified bitumen on Ottawa garages, additions, porches and flat-roofed homes, repaired or replaced.
2026 Ottawa and Ontario published quotes read in September 2026; two sources differed by about two times, so the range is wide on purpose. Your quote will differ.
Find a RooferAbout Flat Roofing
A flat roof is never quite flat: it has a low slope so water can drain. Shingles cannot go on it. The 2024 Ontario Building Code sets a minimum of 1 in 3 for normal asphalt shingle work and 1 in 6 for low-slope shingle application, so below that you are into membranes (Table 9.26.3.1.).
The membranes you will hear about on Ottawa quotes are EPDM (a rubber sheet), TPO (a thermoplastic sheet) and modified bitumen, often two-ply SBS. The Code names the standards each must meet: ASTM D4637 for EPDM, ASTM D6878 for TPO, CAN/CGSB-37.54 for PVC, and CGSB 37-GP-56M and CSA A123.23 for modified bitumen. Modified bituminous membranes are allowed from a slope of 1 in 50 up to 1 in 4. Whatever the membrane, the Code says it must be installed to the manufacturer's written instructions (9.26.2.2.).
The City of Ottawa's permit exemption names asphalt shingles only. We found nothing on ottawa.ca that says whether replacing a flat-roof membrane like for like needs a permit, so confirm with the City before work starts. Structural work, such as rebuilding a sagging deck, is on the City's list of work that needs a permit.
Published Ontario and Ottawa flat-roof prices read in September 2026 run from about $6 to $18 per square foot installed. Two price pages we read differed by about two times, so compare quotes line by line: tear-off, insulation, drains, flashing at walls and the membrane itself.
What This Work Covers
- EPDM, TPO and modified bitumen (two-ply SBS) membranes
- Tear-off of the old membrane
- Drains, scuppers and edge details
- Flashing where the roof meets a wall
- Repairs to blisters, splits and seams
Popular For
What this work costs
Common questions about flat roofing
- Repairing a split EPDM seam on an Ottawa garage?
- Cost of an EPDM roof on a garage in Orleans?
- Tapered insulation for ponding on an Ottawa flat roof?
- Flashing where a flat roof meets a wall in Ottawa?
- What price range is normal for a flat roof replacement in Ottawa?
- Insulating a flat roof during replacement in Ottawa?
- Line items an Ottawa flat roof quote should list?
- TPO flat roof per square foot in Ottawa, what's typical?
Other Roofing Services
Roof Repair
Leaks, lifted or missing shingles, worn vent boots and failed flashing found and fixed on Ottawa homes before the water reaches a ceiling.
Roof Replacement
Asphalt shingle re-roofing on Ottawa homes: tear-off, eave protection, ventilation and new shingles, and what the 2024 Ontario Building Code expects of a re-roof.
Metal Roofing
Standing-seam and metal shingle or panel roofs on Ottawa homes, on slopes the Building Code allows for profiled metal.
Roof Inspection
A look at shingles, flashing, vents and the attic to decide whether an Ottawa roof needs a repair, a replacement or nothing yet.
Roof Ventilation and Ice Dams
Attic vents checked against the Building Code's 1/300 rule, and the heat loss that feeds ice dams at the eaves found and fixed.
Skylights and Flashing
Leaking skylights, chimney and wall flashing and valleys resealed or re-flashed; new skylight openings planned with the permit rules in mind.
Emergency Leak Tarping
A temporary cover over storm or leak damage so water stops getting in until a proper roof repair can be scheduled.
Ready to Get Started?
Tell us about your flat roofing job and we'll send it to local roofing contractors in Ottawa. They reply by email.