Rooftop solar on an Ottawa flat roof: membrane first?
Rooftop solar on an Ottawa flat roof: membrane first?
Membrane first, then solar: what the Code says and what to sort out before you start
The 2024 Ontario Building Code (Div. B, 9.26.1.4.) permits a solar collector system above roofing materials that conform to the Code's material standards. That means the membrane underneath must meet those standards before panels go on top. For a flat roof, the relevant standards are ASTM D4637 for EPDM, ASTM D6878 for TPO, CAN/CGSB-37.54 for PVC, and CGSB 37-GP-56M and CSA A123.23 for modified bitumen. If your existing membrane is aging, damaged or does not meet those standards, replacing it before the array is installed is the right sequence, because pulling panels off later to do membrane work adds cost and complexity.
The minimum slope for a modified bituminous membrane is 1 in 50 under the 2024 Code (Div. B, Table 9.26.3.1.); for built-up roofing without gravel, 1 in 25 to 1 in 2. A roofer can confirm what your roof's slope is and which membrane type suits it.
On permits: a solar collector system with a combined face area of five square metres or more needs a City of Ottawa building permit. For systems under five square metres, we found no City of Ottawa statement either way, so confirm with the City before work starts. For the membrane itself, the City's permit-exemption list names installing asphalt shingles; it says nothing about replacing a flat-roof membrane, so confirm that with the City as well. Heritage-designated properties and properties in a Heritage Conservation District are not covered by any exemption and need City approval before changes.
A fair quote for this project should address these items in writing:
- the membrane: material type and standard it meets, slope, tear-off of the existing membrane, and disposal
- sheathing: price per square foot if rot or damage is found at tear-off (published Ottawa-area quotes show about $3 to $6 per square foot as an extra)
- flashing at the roof edges and any penetrations
- how the racking system attaches and how those penetrations are sealed
- the permit, if one is required, and who pulls it
- WSIB clearance for the roofing crew and whether Working at Heights training is current
Ottawa-area published quotes for flat-roof installation run about $6 to $18 per square foot for the membrane work alone; tear-off adds about $1.50 to $3.50 per square foot. Too few published Ottawa figures exist for the solar racking and installation to quote a range here, so get that in writing from the contractor.
The most useful first call is to the City of Ottawa's Building Code Client Service Centre, before you sign anything with either a roofer or a solar installer, because the permit question covers both the membrane and the array and the answer will shape how both quotes are written.
Related service: Flat Roofing What it costs: Flat roof replacement
Want this done at your place?
Tell us about your roof and we'll send it to local Ottawa roofing contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.
Roofing IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.
Ready to Get Quotes?
Find local roofing contractors in Ottawa. Free matching, no obligation.