Free Roofer Matching Repairs, Re-Roofing, Flat & Metal Roofs Roofing Across Ottawa
Find a Roofer
Flashing, Chimneys & Skylights | 0 views |

Leak at a roof-to-wall joint on an Ottawa addition?

Question

Leak at a roof-to-wall joint on an Ottawa addition?

Answer from Roofing IQ

A roof-to-wall joint depends on flashing, so the flashing is one of the first things a roofer will check. Too few published Ottawa prices exist for flashing repairs to give a reliable range, so ask each roofer to quote the scope in writing before any work starts.

The 2024 Ontario Building Code (Div. B, 9.26.1.2.) says roofing, including flashing, shall be installed to effectively shed water and prevent water and moisture getting into the building. The Code also requires valleys between shingled slopes to be flashed (Div. B, 9.26.4.3.), and where a chimney on a sloping roof is more than 750 mm wide on its upper side, a saddle is required (Div. B, 9.26.4.8.).

A few things a roofer will look at to scope the repair: whether the flashing has separated from the wall cladding or the shingles, whether caulking was used as a substitute for proper metal flashing, whether the sheathing or framing behind the wall cladding has taken on moisture, and whether the shingles at the base of the wall have adequate coverage. The 2024 Ontario Building Code (Div. B, 9.26.7.1.) requires at least two thicknesses of shingle over the entire roof, and (Div. B, 9.26.7.3.) a head lap of at least 50 mm.

On permits: the City of Ottawa's list of projects not requiring a building permit names installing asphalt shingles. Flashing repair is not named on that list, and we found no City of Ottawa statement either way for flashing-only work. Confirm with the City's Building Code Client Service Centre before work starts if the scope goes beyond shingle replacement. If your addition is on a designated heritage property or in a Heritage Conservation District, talk to the City's heritage planners first.

From indoors, check the attic above the addition for frost on the sheathing, damp insulation, or water staining that can help you trace where the water is entering. Take photos and share them with the roofers who quote the job.

The Construction Act requires an owner to hold back 10 per cent of the price of services and materials as they are supplied. For a larger job, ask a lawyer about release timing. You can also search the roofer's WSIB clearance online before work begins.

Before signing, ask each roofer to name, in writing, every flashing piece they will replace at the wall and what they will do if the sheathing behind it is wet.

Ottawa Roofing Pro

Want this done at your place?

Tell us about your roof and we'll send it to local Ottawa roofing contractors, who reply by email. We send it out to local contractors for you. Free, no pressure.

Fields marked are required.

We won't call you. There's no phone box above because we don't ask for one — your estimate comes by email, on your time.

Request received We’ve sent your details to local Ottawa roofing contractors. Interested roofers reply by email. A confirmation is on its way to your inbox.

Roofing IQ -- Built from the Ontario Building Code, Ontario regulations and City of Ottawa sources and real construction experience. Answers are for informational purposes only and are not a professional assessment.

Ready to Get Quotes?

Find local roofing contractors in Ottawa. Free matching, no obligation.

Find a Roofer